Pipe thread: British thread PS, PT, PF; American thread NPS, NPT, NPTF, NPSM.Inch screw thread: Formulating specifications in terms of nominal size and the number of teeth per inch. It is marked as G, which represents cylindrical thread.G is a 55 degree non-threaded sealed pipe thread, and it belongs to the Wyeth thread family. This is the most important difference between them.For example, 1/4 “-20, 3/4” -10, 1 “-8, 1/4” -20 represents the nominal size 1/4, and the big diameter is 6.NPT is the abbreviation of National (American) Pipe Thread. That is, the thread is made from a cylindrical surface.The angle of the thread: Both metric and American threads are 60 degrees, the inch system thread is 55 degrees, the TM pipe thread is 30 degrees, both SM needle thread and BC thread are 60 degrees, the metric trapezoidal thread is 30 degrees, the English trapezoidal thread is 29 degrees, the table thread is TW29 degrees or TM30 degrees.ZG is commonly known as a pipe cone, that is, the thread is processed by a conical surface.2367-0. It belongs to Wyeth thread family and is widely used in Europe and some Commonwealth countries.322); 2A:0. The general water pipe joints are like this.The pipe thread is mainly used for the connection of the pipe, and the inner and outer threads are closely matched, and there are two kinds of pipes which are straight pipe and tapered pipe.Different Thread Typies, Such as PT Thread, NPT Thread, GPosted by Hewcho on January 9th, 2019NPT, PT, G are all pipe threads.Tuyere screw thread: The outer diameter of CTV and TV 1/4-20 is 1A:0.2419-0.1443-6.35) 20 teeth per inch, and so on.Cnc machining chinaHewcho provides you with the best service!.
It is used in North America.2489 (6.116-6.350).322) 3A:0.In addition, 1/4, 1/2 and 1/8 in thread refer to the diameter of thread size, and the units used are inch.2408-0. It is a standard American 60 degreetaper pipe thread.35mm (25. Now we will introduce information about thread type to you.Metric threads use metric units, and British and American threads use English units.G is the general designation of pipe threads (Guan).2489 (6. The national standard can be consulted in GB / T12716. The national standard is marked as Rc.2500 (6.Metric threads are represented by pitch, threads are expressed in terms of the number of threads per inch in America and Britain. The nominal diameter refers to the diameter of the pipe which is connected, and the diameter of the thread is obviously larger than the nominal diameter. The division of 55 and 60 degrees is functional, commonly known as the pipe circles.The metric thread is a 60-degree equilateral tooth type, the inch thread is an isosceles 55-degree tooth type, and American standard thread is 60 degrees.4 except 4=6.Regular screw thread: Metric thread M; inch system thread W; American system UNC, UNE, UNEF.012-6. The national standard can be found in GB/T7307. 1/4, 1/2, 1/8 are the nominal diameters of inch screw threads, and its unit is inch.PT thread typeis the abbreviation of Pipe Thread, which is a 55 degree sealed pipe conveyor manufacturers conical pipe thread. Insiders usually use the points to refer to the thread size, one inch is equal to 8 points, 1/4 inch is 2 points, and so on
留言列表
